Produse pentru echipamente laborator (527)

The sterilised sampling bag SteriBag for samples in chemistry, pharmaceuticals, medicine, veterinary science and foodstuffs etc. The bags are made of polyethylene and are therefore exceptionally tearproof and leakproof. The SteriBag sampling bag is distinguished by its safe handling. When used according to instructions, samples are guaranteed sterile. Integrated safety: The tab-ends are sealed in plastic film to prevent skin injuries. Material:PE

Abrazadera de rosca de acero inoxidable con rosca fina de acero R 2" exterior por diámetro del tubo 32 mm.

Embouts cylindriques en T pour le raccordement de tuyaux Matériel:PP

nickel plated brass*length 250 mm

stainless steel*heavy pattern*graduated

stainless steel*graduated

nickel plated brass*length 200 mm

rounded corners

New construction patented DE 20 2010 006 420*height adjustment by hand or cordless drill: precise,secure, quick*mobile and network-independent operation*integrated safety clutch*stainless steel plates*shear resistant pattern*top plate with Ø 10 mm hole*slip-proof rubber feet*suitable 1/4" bit for cordless drill included in delivery

stainless steel*graduated

New construction patented DE 20 2010 006 420*height adjustment by hand or cordless drill: precise,secure, quick*mobile and network-independent operation*integrated safety clutch*stainless steel plates*shear resistant pattern*top plate with Ø 10 mm hole*slip-proof rubber feet*suitable 1/4" bit for cordless drill included in delivery

wood*steel spring*length 180 mm

stainless steel*for 50 test tubes

SiBrickScan (SBS) is a dedicated at-line system for the FTIR quantification of interstitial Oxygen in complete Silicon ingots, resulting in a concentration profile along the longitudinal axis. Accessing this information without sawing wafers or test samples is a major and cost saving advantage. Get Valuable Information to Check and Optimize Product Quality Knowing the Oxygen gradient of Si ingots enables important conclusions helping e.g. to control and optimize the Silicon crystallization process or to identify batches of bad raw material. Therefore SBS will help to save costs by optimizing product quality and reducing the amount of defective wafers. The random sampling of individual ingots does strongly reduce sample preparation efforts and provides relevant information much earlier.

MATRIX-MF is a rugged and a compact spectrometer that can be fiber optically coupled to measure chemical reactions in laboratory and/or process environments. Bruker's MATRIX-MF FTIR spectrometer expands the proven MATRIX series product line utilizing the information rich mid-IR region for use in both laboratory and process environments. The MATRIX-MF is a process ready FTIR spectrometer that is ideal for real-time monitoring and analysis of chemical and biological reactions.

Innovative, powerful and easy to operate, this and more is BRAVO the handheld Raman spectrometer from Bruker. BRAVO relies on the proven Bruker combination of innovation and quality and combines latest technologies for an unparalleled performance. The patented fluorescence mitigation using Sequentially Shifted Excitation (SSE™) enables the measurement of a much wider range of materials than ever before using handheld Raman spectrometers. Duo LASER™ excitation with two lasers offers the highest sensitivity in a large spectral range from 300 cm-1 to 3200 cm-1 including the CH-stretching vibrations. Furthermore, BRAVO supports the most efficient and clearly laid-out workflow on a large 7 inch touch screen display. This and many more form the basis of a unique product especially designed for raw material verification of finished products in the pharmaceutical industry.

The SENTERRA II defines a new level of spectroscopic performance and user friendliness in the class of compact Raman microscopes. SENTERRA II is designed to deliver excellent sensitivity combined with high spectral and imaging performance. Therefore the SENTERRA II is a powerful platform for advanced research applications. Due to its high degree of automation, compact size and efficient workflow the SENTERRA II is likewise an ideal tool for solving real world tasks in the quality control laboratory. Its unprecedented permanent stability of the wavenumber axis guarantees precise and accurate results at every time. The SENTERRA II is THE Raman microscope for both, the multi-user environment with high daily throughput and for the lab working at the forefront of scientific research.

Der Lödige Labor-Tablettencoater ist modular konzipiert, sodass alle Komponenten individuell nach den jeweiligen Bedürfnissen des Kunden zusammengestellt werden können. Durch eine teilbare Trommel und einen teilbaren Düsarm können auch kleinste Mengen (0,6 l) verarbeitet werden. Der Coater und die optional erhältliche Flüssigkeitsversorgungsstation bestehen aus Corian®, einem äußerst beständigen, leichten und FDA-zugelassenen Material, welches das besonders funktionale und moderne Design des Labor-Coater-Systems ermöglichte. Der Labor-Coater ist nicht nur ein „Laborgerät“, sondern ein vollumfängliches Coatingsystem, in dem Prozessbedingungen geschaffen werden, die mit denen in den Lödige-Produktionscoatern vergleichbar sind. Der mobile Labor-Coater inkl. Trommel für die Tabletten und Schublade für Düsarm und Werkzeug bildet die Basiseinheit. Dazu erhältlich sind die folgenden, ebenfalls mobilen Module: — Zulufteinheit — Ablufteinheit — Flüssigkeitsversorgungsstation (optional) Labor-Coater-System::Zwei zusätzliche Düsen für maximierte Sprührate Lufteinheiten::Komfortausstattung: Steuerung der Zuluftmenge über FU, Steuerung des Trommeldruckes über FU Flüssigkeitsversorgungsstation::mobile Einheit Explosionsschutz::Auslegung der Anlage auf Verwendung organischer Lösungsmittel (Aceton, Isopropanol, Ethanol) Steuerung::portables Panel mit WinCC, FDA-CFR-21-part-11-Konformität durch Siemens-Software „Log On“

The intuitive, easy-to-use OPUS software controls all data collection and manipulation functions for the MultiRAM. The real-time spectrum display permits software control of the analysis conditions, including optimization of the laser power and the sample position. High Performance Combine advanced digital electronics with Bruker Optics’ high quality optics and you have the ultimate in a high performance FT-Raman system. The heart of the MultiRAM is Bruker Optics’ patented interferometer with gold coated optics and permanent RockSolid alignment, which provides the superb stability and throughput required for demanding emission experiments.

Système de pelliculage - des process hautement performants à un prix intéressant - La turbine de laboratoire Lödige pour le développement de médicaments est conçue pour être adaptée aux propriétés des produits du client. De petites quantités (0,6 l) peuvent être traitées grâce au tambour et à l'arbre de pulvérisation divisibles. La turbine et le système d'introduction de liquide (option) sont en Corian®, un matériau composite extrêmement résistant et léger, agréé FDA, et qui permet un design particulièrement fonctionnel et moderne. La turbine de laboratoire n'est pas seulement un « appareil de laboratoire », mais une installation de pelliculage complète permettant de créer des conditions de process comparables aux turbines de production Lödige. La turbine de laboratoire intégrant le tambour pour les comprimés et un tiroir pour l'arbre de pulvérisation se présente sous la forme d'un ensemble mobile et pratique. Les éléments suivants, également mobiles, sont disponibles: — Système d'amenée d'air — Système d'extraction d'air — Système d'amenée de liquides

stainless steel*conical*graduated

stainless steel*finger grip*length 130 mm*up to 30 mm Ø

stainless steel plates*shear resistant pattern

The award winning MATRIX-F II FT-NIR spectrometer allows the direct measurement in process reactors and pipelines, leading to a better understanding and control of the process. Accurate in-line results in seconds Multiple components per measurement Non-destructive analysis Optional built-in 6-port multiplexer Direct method transfer Rugged design Ethernet connectivity and industry standard communication protocols

The Lödige laboratory tablet coater has a modular design, so that integration of any components is customised according to the customer’s specific requirements. A dividable drum and a dividable nozzle arm allow processing of even very small volumes (0.6 l). The coater and the optionally available liquid supply station consist of Corian®, a highly resistant, light-weight, FDA-approved material, which is crucial for the particularly functional and modern design of the laboratory coater system. The laboratory coater is not just a “laboratory machine”, but a full coating system, in which process conditions comparable to those of Lödige production coaters are generated. The mobile laboratory coater incl. the drum for the tablets and drawer for the nozzle arm and tool form the base unit. In addition, the following equally mobile modules are available: — Air supply unit — Exhaust air unit — Liquid supply station (optional) Laboratory coater system::Two additional nozzles for a maximised spray rate Air units::Comfort Equipment: Control of air supply volume via FC, control of drum pressure via FC Liquid supply station::Mobile unit Explosion protection::Machine line design for use of organic solvents (acetone, isopropanol, ethanol) Controls::Portable panel with WinCC, FDA-CFR-21 part-11 conformity due to Siemens software “Log On”

FTIR Excellence for Industry, R&D and Science: INVENIO INVENIO is the definitive spectroscopic solution for routine FTIR analysis as well as research and development. It is all you need and so much more: innovative technologies, intelligent design and its new beam path contribute to an unrivalled user experience. Your advantage: •Outstanding signal-to-noise ratio •Broad spectral range (FIR, MIR, NIR and VIS/UV) •Touch-PC with dedicated software for enhanced productivity •MultiTect™: Up to seven automated and software controlled internal detectors •Transit™: parallel availability of two experimental setups •RockSolid™: reliable, well-proven and precise •CenterGlow™ IR source: optimized light flux and durability •Bruker FM: MIR and FIR spectra in one go •Upgradability: retrofit spectral range extensions or time resolved measurements •Multiple beam inputs and outputs •Compact footprint optimized for laboratory benches

The LUMOS II offers outstanding visual and spectral data quality with full automation of all measurement modes: transmission, reflection and ATR. For FTIR beginners and experts alike, the LUMOS II is the best solution for infrared microscopy. Bruker's exclusive Focal Plane Array (FPA) detector technology allows you to experience detailed imaging at the maximum speed. This allows you to take full advantage of the vast possibilities offered by FT-IR microscopy. The OPUS IR software provides you with assistance whenever you need it and allows you to glide effortlessly through measurement, evaluation and reporting. Your advantages: • Extremely fast FT-IR imaging (FPA) • High spectral quality and resolution • Brilliant visual images and huge field of view • Fully automated FT-IR microscope • Integrated, piezo-controlled ATR crystal • Software supported measurement and evaluation • Automatic measurement in transmission, reflection and ATR

The IFS 125HR is the ultimate instrument for the high resolution IR spectroscopy Outstanding results in your laboratory In absorption or emission mode, the IFS 125HR can resolve highly complex spectra into discrete lines for recognition and spectral assignment. Outstanding resolution across the entire spectrum Resolved linewidths of < 0.0009cm -1 Broad spectral range: from 5cm -1 in the far-IR to >50,000cm -1 in the UV Double-sided interferogram acquisition (option) Symmetric line shapes - due to high precision optics Easy range change - every experiment can access different sources and detectors without breaking vacuum. A total of 4 sources and 6 detectors can be accessed through each of two different sample compartments

The HYPERION II microscope combines FT-IR and infrared laser imaging (ILIM) microscopy in a single instrument for the first time. It offers all three measurement modes: transmission, reflection and ATR. Now, users have the unique opportunity to use an IR microscope that offers both, the reliability and precision of FT-IR and the tremendous speed advantage of IR laser imaging, all in one.

10 cm optical path length for the identification and quantification of high gas concentrations Volume inside the gas cell is 25 ml only PTFE coating of the gas cell enables the measurement even of corrosive gases Accounts for variable pressure and temperature of the gas by sensors The MATRIX-MG01 features a gas cell with 10 cm optical path length and is especially well suited for the quantification of gas compounds with very high concentration. The cell has a volume of 25 ml only to enable a fast gas exchange with minimum gas consumption. Its PTFE coating and ZnSe windows ensure a maximum corrosive protection. The MATRIX-MG01 is equipped with temperature and pressure sensors and their measurement values are automatically read out and considered within the control software OPUS GA.